WS-C3560-48PS-S, Cisco Catalyst 3560 WS-C3560-48PS-S 10/100Mbps + 1000Mbps Switch

Cisco Catalyst 3560 WS-C3560-48PS-S 10/100Mbps + 1000Mbps Switch (p/n WS-C3560-48PS-S)

Item #: WS-C3560-48PS-S

Price: $3,499.98

Qty:

Cisco Catalyst 3560 WS-C3560-48PS-S 10/100Mbps + 1000Mbps Switch

WS-C3560-48PS-S.
The Cisco Catalyst 3560 switch is a fixed configuration, enterprise-class, IEEE 802.3af and Cisco prestandard Power over Ethernet (PoE) switch in Fast Ethernet configuration that provides availability, security, and quality of service to enhance network operations. The Catalyst 3560 can provide a lower total cost of ownership for deployments that incorporate IP phones and Aironet wireless LAN access points, as well as any IEEE 802.3af-compliant end device.
Maximum power availability for a converged voice and data network is attainable when a Catalyst 3560 Switch is combined with the Cisco Redundant Power System 675 (RPS 675) for seamless protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.
Specifications:
- Brand: CISCO
- Series: CATALYST 3560
- Model: WS-C3560-48PS-S
- Standards: IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p CoS Prioritization, IEEE 802.1Q VLAN, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-X, 1000BASE-X (SFP), 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-ZX, 1000BASE-CWDM SFP 1470 nm, 1000BASE-CWDM SFP 1490 nm, 1000BASE-CWDM SFP 1510 nm, 1000BASE-CWDM SFP 1530 nm, 1000BASE-CWDM SFP 1550 nm, 1000BASE-CWDM SFP 1570 nm, 1000BASE-CWDM SFP 1590 nm, 1000BASE-CWDM SFP 1610 nm, RMON I and II standards, SNMPv1, SNMPv2c and SNMPv3.
- Jumbo Frames: Up to 1546 bytes
- Ports: 48 Ethernet 10/100 ports with PoE and 4 SFP-based Gigabit Ethernet ports
- Speed: 10/100Mbps + 1000Mbps
- MAC Address Table: Up to 12,000
- Buffer Memory: 128 MB DRAM, 16-MB Flash memory
- Security:
* IEEE 802.1x allows dynamic, port-based security, providing user authentication.
* IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected.
* IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port.
* IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses, including those of the client.
* IEEE 802.1x with an ACL assignment allows for specific identity-based security policies regardless of where the user is connected.
* IEEE 802.1x with Guest VLAN allows guests without 802.1x clients to have limited network access on the guest VLAN.
* CISCO security VLAN ACLs (VACLs) on all VLANs prevent unauthorized data flows from being bridged within VLANs.
* CISCO standard and extended IP security router ACLs (RACLs) define security policies on routed interfaces for control- and data-plane traffic.
* Port-based ACLs (PACLs) for Layer 2 interfaces allow application of security policies on individual switch ports.
* Unicast MAC filtering prevents the forwarding of any type of packet with a matching MAC address.
* Unknown unicast and multicast port blocking allows tight control by filtering packets that the switch has not already learned how to forward.
* SSHv2, Kerberos, and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions.
* Private VLAN provides security and isolation between switch ports, helping ensure that users cannot snoop on other users traffic.
* Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the CISCO Secure Intrusion Detection System (IDS) to take action when an intruder is detected.
- Cabling:
* 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling.
* 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)
* 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
* 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)
* 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
* 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
* 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
* Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm
* Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45- to-DB-25 female data-terminal-equipment (DTE) adaptor
- LED's:
* Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications.
* System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications.
- VLAN Support: Yes
- Power: 100–240 VAC (autoranging), 5.5–2.8A, 50–60Hz
- Dimensions: 17.5" x 14.9" x 1.7"
- Weight: 13.2 lbs.
- Temperature: 0ºC to 45ºC (32ºF to 113ºF)
- Humidity: 10 to 85% (noncondensing)
Features:
- 1RU fixed-configuration, multilayer switch
- Enterprise-class intelligent services delivered to the network edge
- IEEE 802.3af and CISCO prestandard Power over Ethernet
- IP Base license (formerly SMI) installed
- Basic RIP and static routing, upgradeable to full dynamic IP routing
- Advanced QoS
- Granular Rate Limiting.
Used.
The WS-C3560-48PS-S carries a MemoryTen 30 Days exchange or repair warranty against manufacturing defects. It may also be returned in original condition within 14 days of delivery for full credit minus shipping. We also supply unlimited lifetime tech support for this item.
101508, 101708